Drawing notes

Common notes for 2D drawings.

---

General

1.  INTERPRET DRAWING PER ASME Y14.5-2018.
2.  UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN `MILLIMETERS / INCHES`
3.  UOS, DIM ARE IN `MILLIMETERS / INCHES`

Product Definition

1.  THIS DRAWING SHALL BE USED WITH MODEL XXX FOR COMPLETE PRODUCT DEFINITION.
2.  ALL DIMENSIONS AND TOLERANCES APPLY AFTER POST PROCESS.
3.  MATERIAL: `XXX`
4.  POST PROCESS: `XXX`

Quality

1.  ONGOING INSPECTION REQUIRED FOR `XXX` ITEMS DENOTED WITH `XXX`.
2.  MATERIAL CERTIFICATION TO BE SHIPPED WITH EACH LOT.
3.  FOR FIRST ARTICLE INSPECTION ALL DIMENSIONS ON DRAWING WILL BE MEASURED.

Post Processes

1.  TYPE II BLACK ANODIZE PER MIL-A-8625, CLASS 2
2.  REMOVE ALL BURRS AND SHARP EDGES EQUIVALENT TO R `0.1 mm or .005 IN`.